올인원 COB LED TV 
유연한 LED 디스플레이 
투명 LED 디스플레이 
주도 포스터 
원형 LED 디스플레이 
컬럼 LED 스크린 
창의적이고 맞춤형 LED 디스플레이 
LED 디스플레이 대여
승무원을 위해 제작됨
출근 시간에 맞춰 사는 사람들.
Road-Ready Build · Verified Weights · Pre-Calibrated Sets · Same-Day Engineer Support
대부분의 LED 조명 캐비닛은 설치용으로 설계되었습니다. 저희 제품은 이동식 조명용으로 설계되었습니다. DOIT VISION 렌탈 패널은 200회 이상의 전시회 주기를 견딜 수 있도록 제작되었습니다., configured for your processor before they leave the factory, and backed by an engineer available the night your show opens — not a ticketing system that replies on Monday.
일
Standard
SET를
모든 주문
일
응답
/ NOVA / CL
준비
대부분의 LED는 이렇게 만들어집니다.
설치용.
“Rental companies lose money when equipment fails on the road. And the most expensive failure is the one that happens at 11PM during a live show, when your supplier’s support line rings out. We built DOIT VISION’s rental line around one principle: the equipment has to work, the support has to be there, and the specs on the sheet have to match what arrives.”
Standard installation LED is engineered for permanence — once it’s up, it stays up. Rental LED lives a completely different life: loaded in and out 3 times a week, stacked in trucks, hung from trusses at maximum rated load, and expected to perform flawlessly every single night.
The problems that expose cheap rental LED show up at the worst times. Lock mechanisms that strip after 20 cycles. Cabinets that arrive heavier than the spec sheet said — which means your rigger’s load calculation is wrong on the first show. Colour drift when you expand your inventory. No spare parts when a module fails mid-tour.
저희는 이러한 모든 문제를 해결하기 위해 DOIT VISION 렌탈 라인을 설계 단계부터 구축했습니다., not as afterthoughts. Verified weights. Industrial-grade locking. Matched-set calibration. Spare parts in the box.
Your rigger’s load calculation depends on accurate data. We weigh production units and certify the spec sheet figure against actual shipment weight.
CNC-machined magnesium alloy locking mechanism. Tested to 200 full lock-unlock cycles before certification. Not stamped steel that loosens after heavy touring.
The entire order is calibrated against a shared reference so your wall reads as one surface. LED bin-code recorded for expansion orders.
Receiver cards, pixel masks, power supply — spare kit ships with every rental order as standard.
여섯 가지 문제
WE ENGINEERED
OUT.
사양서에는 12kg이라고 적혀 있었는데, 실제로 도착한 제품은 17kg이었습니다.
Your rigger calculated load based on the manufacturer’s published weight. The cabinets arrive significantly heavier. Your truss rating is now exceeded and the show is tomorrow.
퀵락 잠금장치가 20번의 장거리 운전 후 마모되었습니다.
Stamped steel locking mechanisms look fine in a showroom. After a touring season of repeated load-in and load-out, the tolerances open up and the lock no longer holds. Mid-show, a panel drops.
밤 11시입니다. 아무것도 작동하지 않습니다. 아무도 전화를 받지 않습니다.
The factory support line rings out. You’re sent to a support email inbox. Nobody on the other end has ever touched your specific product. Your client’s show opens at 9AM.
투어 도중 모듈 하나에 문제가 발생했습니다. 교체까지 6주가 소요됩니다.
A single bad pixel mask or receiver card takes one cabinet off the wall. The factory says replacement parts will ship sea freight. Your tour has 14 more dates.
새로 설치한 캐비닛이 작년에 설치한 것과 색상이 맞지 않아요.
You order 20 more cabinets 8 months after your original purchase. The LED bin code has changed and nobody told you. On stage, the colour drift is visible to the audience.
투어를 마치고 돌아온 캐비닛 세 개는 이런 모습이었습니다.
Inadequate carton packing for touring gear. No internal foam. No flight case option. A sea-freight return for repairs is not a solution when you have bookings next month.
제작 목적
길.
Four rental lines for different touring demands — from the all-round Matrix 500 workhorse to lightweight Lite, tall-format X-1000, and curved Flex. Every series ships with verified weight specs, fast-lock mechanism, matched-set calibration, and a spare parts kit.
매트릭스 500 패스트락 시리즈
The touring workhorse. CNC magnesium alloy fast-lock rated for 200+ cycles. Indoor and outdoor variants in one platform — the default choice for rental companies building a general-purpose inventory.
View Matrix 500 Specs →X-1000 시리즈
Half the rigging points on tall festival and stage walls. The 500×1000mm format cuts cabinet count, assembly time, and load-in labour on vertical builds — without sacrificing matched-set calibration or road-ready construction.
Coming Soon →라이트 시리즈
Lighter chassis for crews who load in and out daily. Indoor P1.9 for close-view corporate and broadcast. Outdoor variants for covered festival stages. Same spare parts kit and matched-set calibration as the full-weight lines.
View Lite Series Specs →플렉스 시리즈
Flexible LED modules in a standard touring cabinet chassis. Build concave, convex, and wave-format rental walls without a custom-engineering lead time. Ideal for creative stages, DJ booths, and branded curved backdrops on tour.
View Flex Series Specs →네 가지가 지속됩니다
YOUR SHOWS
RUNNING.
쇼룸에서만 견딜 수 있는 것이 아니라, 도로 위에서도 견딜 수 있도록 설계된 캐비닛입니다.
Every decision in our rental cabinet design is made against one question: will this still work after 200 shows? The locking mechanism. The connector housing. The PCB mounting. The cabinet corner protection.
사용하시는 프로세서에 맞게 사전 구성되어 있으며, 완벽한 매칭 세트로 보정되었습니다.
We don’t ship LED panels and leave you to configure the processing. Every DOIT VISION rental order ships pre-configured for your specified processor — with the calibration done as a matched set, not panel-by-panel.
Messages outside the active window receive a reply within 2 hours of the next window opening.
필요하기도 전에 부품들이 상자에 들어있습니다.
The worst time to find out you don’t have a spare receiver card is mid-tour. We include a spare parts kit with every rental order as standard — before you’ve experienced a failure.
티켓 발권 시스템이 아니라 공연 날짜를 아는 엔지니어가 필요합니다.
Share your show schedule at order time. We pre-schedule engineer availability for your installation windows and opening nights — not a generic on-call, but a specific person who knows your project, your processor, and your panel configuration.
Messages outside the active window receive a reply within 2 hours of the next window opening.
우리는 존재 자체로 경쟁하지 않습니다.
THE
CHEAPEST OPTION.
We compete on being the rental inventory you can actually rely on. Here’s how our rental line compares to generic Chinese rental LED.
| 투어링 렌터카에서 중요한 것은 무엇일까요? | 두잇비전 | 중국산 일반 렌탈 LED |
|---|---|---|
| 공개된 무게 정확도 | ✓ 생산 단위 대비 검증 및 중량 인증 완료 | 일반적으로 ±15~25%의 편차가 발생할 수 있으며, 생산 과정에서 검증된 것은 아닙니다. |
| 잠금 장치 품질 | ✓ CNC 가공 마그네슘 합금, 200회 이상 사이클 테스트 완료 | 스탬프 가공된 강철은 장기간 투어링 후 공차 범위가 넓어집니다. |
| 매칭 세트 교정 | ✓ 전체 주문은 공유 기준에 따라 보정되었습니다. | 개별 패널 보정만 가능 - 벽면에서 드리프트 현상 확인 가능 |
| 확장 주문 색상 일치 | ✓ LED 빈 코드는 배치별로 기록되며, 재주문 시 대조됩니다. | 기록이 보관되지 않으므로 색상 일치는 보장되지 않습니다. |
| 주문 시 예비 부품 제공 | ✓ 수신 카드, 픽셀 마스크, 전원 공급 장치 - 모든 주문에 기본 포함 | 별도 구매만 가능하며, 제작 기간은 몇 주 소요됩니다. |
| 브롬톤 테세라 사전 구성 | ✓ EDID 사전 로드됨, .vwf 파일 포함, SX40/Ti/4K 지원 | "호환 가능" - 도착 후 수동 설정 및 보정이 필요합니다. |
| 공연 당일 엔지니어 지원 | ✓ 공연 날짜별 사전 예약 대기, WhatsApp 영상 통화 가능 | 일반 고객 지원 이메일 - 응답 시간은 보장되지 않습니다. |
| 플라이트 케이스 옵션 | ✓ ATA 규격 버터플라이 플라이트 케이스 (내부 폼 포함) | 기본 박스 포장 - 항공 화물 케이스 옵션 없음 |
| 리드타임 정확도 | ✓ 견적 단계에서 확정된 서면 납기일 제공 | 견적서 제공됨 - 결제 후 지연이 잦음 |
첫 통화부터
TO FIRST
SHOW.
Building a rental inventory with DOIT VISION takes 5 steps. Here’s exactly what happens.
Tell us your target events (indoor stage, outdoor festival, corporate), typical screen sizes, preferred processor, and rigging constraints. An engineer responds same day with product recommendations and verified weight data.
We provide verified weight sheets, lock mechanism demonstration video, and full cabinet spec. For new partners, we offer a sample cabinet shipment before full order. No commitment until you’re confident.
Your order enters production. Weekly photo and video updates from the floor. Your LED bin-code is recorded at this stage. Matched-set calibration happens in the final production phase.
Spare parts kit, config USB (Brompton/Novastar/Colorlight files), weight certificates, calibration report, wiring diagrams, and user manual — all in the shipment. No chasing separate documents.
When you need more cabinets, we pull your original LED bin-code and match it. If an exact match isn’t available, we tell you before production and give you options — not after delivery.
We are a 60-person Shenzhen operation — 15 core engineers and a 45-person production and support team. We are not a mega-factory. We don’t hold stock in US or EU warehouses. If you need cabinets next week from local stock, we are not the right supplier for that timeline.
What we are is the team that ships in 15–25 days, puts the real weight on the spec sheet, picks up the phone the night of your show, and is still here 3 years later when you need an expansion order to colour-match the first batch.
진짜 쇼.
진짜 승무원들.
Rental and touring projects delivered by DOIT VISION partner companies worldwide.
엔지니어 15명.
NO SALES REPS IN THE
WAY.
When you WhatsApp us the night before your show, this is who answers.
Handles pre-configuration, EDID setup, and live calibration troubleshooting for Brompton Tessera and Novastar systems.
Designs and tests fast-lock mechanisms and cabinet structural integrity. Verifies weight specifications against production units.
Runs matched-set calibration using NovaLCT and Brompton Tessera software. Records and maintains LED bin-code database for expansion orders.
Coordinates show-night standby schedules, pre-loads config USB packages, and manages spare parts kit assembly for every rental shipment.
Our engineering team is intentionally small. Past 50 engineers, coordination overhead means your question gets routed — not answered. At 15, the person who pre-configured your panels is the same person who picks up your WhatsApp on show night.
렌터카 회사에 문의사항이 있습니다.
ACTUALLY
ASK US.
DOIT VISION’s rental range includes four touring lines: Matrix 500 (500×500mm fast-lock workhorse, indoor and outdoor), X-1000 (500×1000mm tall-format for large festival walls), 라이트 시리즈 (lightweight 500×500mm, indoor P1.9–P3.9 and outdoor P2.6–P3.9), and Flex Series (flexible-module cabinets for curved rental walls, P1.953–P2.976). All lines feature verified weight specifications, magnetic fast-lock mechanisms, matched-set calibration, and Brompton Tessera / Novastar / Colorlight pre-configuration as standard.
Yes. All DOIT VISION rental panels ship pre-configured for your specified processor — Brompton Tessera SX40, Ti, or 4K; Novastar MCTRL300, 600, MX40 Pro; or Colorlight Z4, Z6. EDID data is pre-loaded. Configuration files and firmware binary are included on USB with every shipment. For Brompton users, we also include the .vwf calibration file compatible with Tessera software.
Every production batch is assigned a LED bin-code and PCB revision number, both recorded in your order file. When you place an expansion order, we cross-reference that data to match your original specification. If an exact LED bin match is no longer available — which happens when a bin production run ends — we tell you before production starts, not after delivery, and provide options: closest available bin with a full-wall recalibration file, or a scheduled hold until a matching bin is available.
Individual calibration corrects each panel to its own target white point. Matched-set calibration corrects all panels in your order against a shared reference, so that when you assemble them on stage, the wall reads as a single uniform surface under camera. We use NovaLCT or Brompton Tessera software for matched-set calibration. The calibration file is included in your shipment and tied to your specific production batch.
The Matrix 500 cabinet (500×500mm) weighs 7.2kg including power supply. Weight figures on our spec sheets are verified against production units and matched to actual shipment weight — not marketing estimates. If you need weight certificates for rigging load calculations, we provide them with the delivery documentation.
Every rental order ships with a spare parts kit as standard: 2× receiver cards, 4× pixel masks (matched to your pitch), 1× power supply module, 2× signal cables, and 1× power cable. For orders above 50 cabinets, we include an extended spare kit. We also offer a separate annual spare parts replenishment programme for high-utilisation rental companies.
For every project, share your show dates at order time. We pre-schedule engineer availability aligned to your installation window — including evenings, weekends, and early mornings for load-in calls. Support is via WhatsApp video call, which covers commissioning, calibration troubleshooting, and processor configuration in real time. Our active support window is Beijing 8AM–10PM (UTC+8), Monday to Saturday. For shows outside that window, we pre-arrange extended coverage at no extra cost for orders above 20 cabinets.
The Matrix 500 indoor rental series is rated IP40 — suitable for covered stages and indoor events. Our outdoor rental series carries IP54 protection, suitable for festivals and outdoor stages with side weather protection. For fully exposed outdoor permanent installations, our outdoor fixed series offers IP65/IP68. We recommend IP54 rental cabinets for festival touring and IP40 for indoor touring inventory.
Standard rental SKUs: 15–25 working days from deposit confirmation. For orders requiring matched-set calibration (all rental orders by default), add 3–5 days for calibration and QC before crating. Rush production has been achieved in 12 working days for urgent tour inventory; discuss at enquiry stage. We provide a firm, written delivery date at quotation — not an estimate.
All DOIT VISION rental products carry CE (EU), FCC (US), and RoHS certifications. ISO 9001 manufacturing certification applies to the full production facility. For European touring, CE marking covers standard stage and event use. For US touring, FCC covers standard commercial event use. ETL or UL listing is achievable via third-party labs with 8–12 weeks additional lead time if required for specific venues.